LOW-PRESSURE CENTRIFUGAL FAN. HIGH EFFICIENCY AND LOW-NOISE REVERSE-BLADE IMPELLER. DIRECTLY COUPLED MOTOR.
£1,525.00
Description
Use: for the removal of clean or slightly dusty air. They have high efficiency and reduced noise level, the fans of this series are largely used, inventilation, conditioning, drying, cooling, mechnical draft, and toxic gas elimination plants. The temperature of the fluid transported must not exceed 80°C without cooling fan and 150° C with cooling fan.
For higher temperatures it is necessary to modify the construction of the fan. ErP: these fans are covered by Directive 2009/125/EC. This law does not apply in the following cases: – Operation in potentially explosive atmospheres (ATEX) – Operation with high temperatures (fans designed with cooling fan) – Operation with temperatures below -40°C – Working in toxic, corrosive or abrasive enviroments (use of material such as AISI 304, AISI 316, manganese steels).
These series are centrifugal backward curved fans and therefore expected Ntarget = 61 (Reg. UE N.327/2011). ErP calculations take into account efficiency IE2 motors conforming to IEC 60034-30.
Additional information
| Weight | 476 kg |
|---|---|
| Decibels | |
| Technical Info | AIR FLOW 225-630m3/min INLET PRESSURE 89-210kg/m2 OUTLET PRESSURE 90-215kg/m2 ENGINE INSTALLED 180 M-4poles INSTALLED POWER 18.5KW ROTATION SPEED 1470round/min LIMIT SPEED 1520round/min FLUID TYPE Clean INLET FLANGE ⌀808mm OUTLET FLANGE 800x560mm WEIGHT WITHOUT ENGINE 300Kg GD2 16.5Kgm2 |